top of page

How do I identify riven paving?

Riven Concrete Tile resemble a mountain's face.  

Why choose AIM riven paving?

A riven concrete tile is a a good option to spruce up a patio, park walkway or water feature. Due to the versatility in colour shades available from AIM and texture resembling that of natural stone, a riven paver will enable you to get a classy look for a fraction of the cost.

AIM provide numerous textures and finishes to enhance your development.


We AIM to work with urban designers and streetscape designer to provide an inclusive habitat to all road users, through the utilisation of different finishes.

When the concrete tile has undergone a process of texturing either by rotating disk or shot/sand blasting, it is collectively known as an exposed aggregate finish. Riven is not an exposed aggregate product.

Riven Concrete Paving

Where is riven concrete paving usually used?

Riven concrete paving is usually used in pedestrian areas, due to its anti-slip properties, although they are often used in water features or on borders.

What quality standards do AIM follow?

AIM's range of paving tiles and blocks conform to and exceed the BS-EN 1339 standard and are known for its superior quality.

We achieve this by manufacturing hydraulically pressed products, using wet mix concrete technology, not allowing for any honeycombing to occur and therefore producing a market leading quality to be proud of.

AIM are capable of manufacturing a large variety of sizes in different thicknesses. Over the past 12 years we have built our mould range up to cater for the growing demands and requirements of the Saudi market. We are able to manufacture odd thicknesses due to our wet mix technology.


In addition to the moulds we have amassed, AIM have invested in producing our own line of cutting machines. AIM utilise cutting machines to provide smaller dimensions such as 100x100mm or odd shapes such as quadrilaterals.

How do I maintain my riven paving?

AIM quality standards mean that the product is structurally sound and the colour will last as long as it is installed using AIM Installation Guidelines.

For small areas, we recommend using a specialised cleaning agent which can be procured from the likes of Karcher, and use a jet washing machine to take of the layer of dirt on top. This process should be done at least once a year.

For larger areas, we recommend using a sit-on machine, using the same chemical, at least once a year.

Follow instructions on the chemical product to ensure the product does not stain or diminish the texture of the product.

AIM work with a handful of trusted contractors to carry out these services. Drop us a call or email to inquire for further information.

bottom of page